 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| XC62H Series Positive Voltage Regulators (Output ON/OFF) ETR0312_001 GENERAL DESCRIPTION The XC62H series are highly precise, low power consumption, positive voltage regulators, manufactured using CMOS and laser trimming technologies. The series consists of a high precision voltage reference, an error correction circuit, and an output driver with current limitation. By way of the CE function, with output turned off, the series enters standby. In the stand-by mode, power consumption is greatly reduced. SOT-25 (150mW), SOT-89-5 (500mW) and USP-6B (100mW) packages are available. In relation to the CE function, as well as the positive logic XC62HR series, a negative logic XC62HP series (custom) is also available. APPLICATIONS Battery powered equipment Voltage supplies for cellular phones Cameras, Video recorders Palmtops FEATURES Maximum Output Current : 165mA (within max.power dissipation, VOUT=3.0V) Output Voltage Range : 2.0V ~ 6.0V in 100mV increments (1.5V ~ 1.9V semi-custom) Highly Accurate : Set-up Voltage 2% (1% for semi-custom products) Low Power Consumption : 3.0A (TYP.) (VOUT=3.0, Output enabled) : 0.1A (TYP.) (Output disabled) Output Voltage Temperature Characteristics : 100ppm / (TYP.) Line Regulation Small Dropout : 0.2% / V (TYP.) : 0.18V @ 60mA : 0.58V @ 160mA Ultra Small Packages : SOT-25 (150mW) mini-mold SOT-89-5 (500mW) mini-power mold USP-6B (100mW) CMOS Low Power Consumption TYPICAL APPLICATION CIRCUIT TYPICAL PERFORMANCE CHARACTERISTICS 1/19 XC62H Series PIN CONFIGURATION *The dissipation pad for the USP-6B package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VIN pin. PIN ASSIGNMENT PIN NUMBER SOT-25 1 2 3 4 5 SOT-89-5 4 2 3 1 5 USP-6B 2, 5 1 6 4 3 PIN NAME (NC) VIN CE VSS VOUT FUNCTION No Connection Supply Voltage Input Chip Enable Ground Regulated Output Voltage FUNCTION SERIES XC62HR XC62HP CE H L H L VOLTAGE OUTPUT ON OFF OFF ON H = High level L = Low level PRODUCT CLASSIFICATION Ordering Information XC62H DESIGNATOR DESCRIPTION CE Pin Logic Output Voltage Temperature Characteristics Output Voltage Accuracy SYMBOL R P 20~60 0 1 2 M P D R L DESCRIPTION : Positive : Negative (Custom) :e.g. VOUT 3.0V =3, =0 VOUT 5.0V =5, =0 : + 100ppm (TYP.) : + 1% (semi-custom) : + 2% : SOT-23 : SOT-89-5 : USP-6B : Embossed tape, standard feed : Embossed tape, reverse feed Package Type Device Orientation 2/19 XC62H Series BLOCK DIAGRAM 3/19 XC62H Series ABSOLUTE MAXIMUM RATINGS Ta=25 PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage SOT-25 Power Dissipation SOT-89-5 USP-6B Operating Temperature Range Storage Temperature Range Topr Tstg Pd SYMBOL VIN IOUT VOUT VCE RATINGS 12.0 500 VSS -0.3 ~ VIN +1.3 VSS -0.3 ~ VIN +1.3 150 500 100 -30 ~ +80 -40 ~ +25 mW UNITS V mA V V ELECTRICAL CHARACTERISTICS XC62HR2002 VOUT(T)=2.0V PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) (*1) Ta=25 SYMBOL VOUT (E) (*2) CONDITIONS IOUT=40mA VIN=3.0V VIN=3.0V, VOUT(E)1.8V VIN=3.0V 1mAIOUT60mA IOUT=40mA IOUT=100mA VIN=VCE=3.0V VIN=3.0V, VCE=VSS IOUT=40mA 3.0VVIN10.0V IOUT=40mA -30Topr80 MIN. 1,960 115 1.5 -0.2 TYP. 2,000 45 180 580 2.9 0.2 100 -0.05 MAX. 2,040 90 360 880 7.9 0.1 0.3 10.0 0.25 0.1 0 UNITS V mA mV mV mV A A %/V V ppm / V V A A CIRCUI T 1 1 1 1 1 2 2 1 1 1 1 2 2 IOUT max VOUT Vdif1 Vdif2 Supply Current 1 ISS1 Supply Current 2 ISS2 VOUT Line Regulation VINVOUT Input Voltage VIN Output Voltage VOUT Temperature Characteristics ToprVOUT CE "High" Voltage VCEH CE "Low" Voltage VCEL CE "High" Current ICEH CE "Low" Current ICEL VCE=VIN VCE=VSS NOTE: *1: VOUT(T)=Specified output voltage . *2: VOUT(E)=Effective output voltage (i.e. the output voltage when "VOUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IOUT value). *3: Vdif= {VIN1 (*5)-VOUT1 (*4)} *4: VOUT1= A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT {VOUT(T)+1.0V} is input. *5: VIN1= The input voltage when VOUT1 appears as input voltage is gradually decreased. 4/19 XC62H Series ELECTRICAL CHARACTERISTICS (Continued) XC62HR3002 VOUT(T)=3.0V PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) (*1) Ta=25 SYMBOL VOUT (E) (*2) CONDITIONS IOUT=40mA VIN=4.0V VIN=4.0V, VOUT(E)2.7V VIN=4.0V 1mAIOUT80mA IOUT=60mA IOUT=160mA VIN=VCE=4.0V VIN=4.0V, VCE=VSS IOUT=40mA 4.0VVIN10.0V IOUT=40mA -30Topr80 MIN. 2,940 165 1.5 -0.2 TYP. 3,000 45 180 580 3.0 0.2 100 -0.05 MAX. 3,060 90 360 880 8.0 0.1 0.3 10.0 0.25 0.1 0 UNITS CIRCUIT V mA mV mV mV A A %/V V ppm / V V A A 1 1 1 1 1 2 2 1 1 1 1 2 2 IOUT max VOUT Vdif1 Vdif2 Supply Current 1 ISS1 Supply Current 2 ISS2 VOUT Line Regulation VINVOUT Input Voltage VIN Output Voltage VOUT Temperature Characteristics ToprVOUT CE "High" Voltage VCEH CE "Low" Voltage VCEL CE "High" Current ICEH CE "Low" Current ICEL VCE=VIN VCE=VSS XC62HR4002 VOUT(T)=4.0V PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) (*1) Ta=25 SYMBOL VOUT (E) (*2) CONDITIONS IOUT=40mA VIN=5.0V VIN=5.0V, VOUT(E)3.6V VIN=5.0V 1mAIOUT100mA IOUT=80mA IOUT=180mA VIN=VCE=5.0V VIN=5.0V, VCE=VSS IOUT=40mA 5.0VVIN10.0V IOUT=40mA -30Topr80 MIN. 3,920 200 1.5 -0.2 TYP. 4,000 45 170 560 3.1 0.2 100 -0.05 MAX. 4,080 90 340 840 8.1 0.1 0.3 10.0 0.25 0.1 0 UNITS CIRCUIT V mA mV mV mV A A %/V V ppm / V V A A 1 1 1 1 1 2 2 1 1 1 1 2 2 IOUT max VOUT Vdif1 Vdif2 Supply Current 1 ISS1 Supply Current 2 ISS2 VOUT Line Regulation VINVOUT Input Voltage VIN Output Voltage VOUT Temperature Characteristics ToprVOUT CE "High" Voltage VCEH CE "Low" Voltage VCEL CE "High" Current ICEH CE "Low" Current ICEL VCE=VIN VCE=VSS NOTE: *1: VOUT(T)=Specified output voltage . *2: VOUT(E)=Effective output voltage (i.e. the output voltage when "VOUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IOUT value). *3: Vdif= {VIN1 (*5)-VOUT1 (*4)} *4: VOUT1= A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT {VOUT(T)+1.0V} is input. *5: VIN1= The input voltage when VOUT1 appears as input voltage is gradually decreased. 5/19 XC62H Series ELECTRICAL CHARACTERISTICS (Continued) XC62HR5002 VOUT(T)=5.0V PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) (*1) Ta=25 SYMBOL VOUT (E) (*2) CONDITIONS IOUT=40mA VIN=6.0V VIN=6.0V, VOUT(E)4.5V VIN=6.0V 1mAIOUT100mA IOUT=100mA IOUT=200mA VIN=VCE=6.0V VIN=6.0V, VCE=VSS IOUT=40mA 6.0VVIN10.0V IOUT=40mA -30Topr80 MIN. 4,900 220 1.5 -0.2 TYP. 5,000 40 165 540 3.1 0.2 100 -0.05 MAX. 5,100 80 320 820 8.1 0.1 0.3 10.0 0.25 0.1 0 UNITS CIRCUIT V mA mV mV mV A A %/V V ppm / V V A A 1 1 1 1 1 2 2 1 1 1 1 2 2 IOUT max VOUT Vdif1 Vdif2 Supply Current1 ISS1 Supply Current2 ISS2 VOUT Line Regulation VINVOUT Input Voltage VIN Output Voltage VOUT Temperature Characteristics ToprVOUT CE "High" Voltage VCEH CE "Low" Voltage VCEL CE "High" Current ICEH CE "Low" Current ICEL VCE=VIN VCE=VSS NOTE: *1: VOUT(T)=Specified output voltage . *2: VOUT(E)=Effective output voltage (i.e. the output voltage when "VOUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IOUT value). *3: Vdif= {VIN1 (*5)-VOUT1 (*4)} *4: VOUT1= A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT {VOUT(T)+1.0V} is input. *5: VIN1= The input voltage when VOUT1 appears as input voltage is gradually decreased. 6/19 XC62H Series TYPICAL APPLICATION CIRCUIT Standard Circuit TEST CIRCUITS Circuit 1 Circuit 2 7/19 XC62H Series TYPICAL PERFORMANCE CHARACTERISTICS (1) Output Voltage vs. Output Current (2) Output Voltage vs. Input Voltage 8/19 XC62H Series TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (2) Output Voltage vs. Input Voltage (Continued) (3) Dropout Voltage vs. Output Current 9/19 XC62H Series TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (4) CE Pin Threshold Voltage vs. Input Voltage (5) Supply Current vs. Input Voltage 10/19 XC62H Series TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (5) Supply Current vs. Input Voltage (Continued) (6) Output Voltage vs. Ambient Temperature 11/19 XC62H Series TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (7) Supply Current vs. Ambient Temperature (8) Input Transient Response 1 12/19 XC62H Series TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (8) Input Transient Response 1 (Continued) (9) Input Transient Response 2 13/19 XC62H Series TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (9) Input Transient Response 2 (Continued) (10) Load Transient Response 14/19 XC62H Series TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (10) Load Transient Response (Continued) (11) CE Pin Transient Response 15/19 XC62H Series TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (11) CE Pin Transient Response (Continued) (12) Ripple Rejection Rate 16/19 XC62H Series PACKAGING INFORMATION SOT-25 SOT-89-5 USP-6B 17/19 XC62H Series REFERENCE PATTERN LAYOUT DIMENSIONS USP-6B Note: Recommended metal mask design MARKING RULE SOT-25, SOT-89-5 5 4 Represents integer of the output voltage MARK 0 1 2 3 4 5 6 7 VOLTAGE (V) 0.x 1.x 2.x 3.x 4.x 5.x 6.x 7.x 8.x 9.x MARK 0 1 2 3 4 5 6 7 8 9 VOLTAGE (V) 0.x 1.x 2.x 3.x 4.x 5.x 6.x 7.x 8.x 9.x 1 2 3 SOT-25 (TOP VIEW) 5 2 4 8 9 Represents decimal number of the output voltage MARK 0 1 2 3 4 5 6 7 8 9 VOLTAGE (V) x.0 x.1 x.2 x.3 x.4 x.5 x.6 x.7 x.8 x.9 MARK 0 1 2 3 4 5 6 7 8 9 VOLTAGE (V) x.0 x.1 x.2 x.3 x.4 x.5 x.6 x.7 x.8 x.9 1 2 SOT-89-5 (TOP VIEW) 3 Based on internal standards Represents assembly lot number. 0 to 9, A to Z repeated (G, I, J, O, Q, W excepted) 18/19 XC62H Series 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this catalog is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this catalog. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this catalog. 4. The products in this catalog are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this catalog within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this catalog may be copied or reproduced without the prior permission of Torex Semiconductor Ltd. 19/19 |
Price & Availability of XC62HR6001DL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |